specifications subject to change without notice. all dimensions in inches. ? copyright 2007 the connor-winfield corporation bulletin page revision date vx514 1of2 03 05 dec 2007 5.0x7.0mm lvcmos 3.3v vcxo the connor winfield, rohs compliant model v802 is a 3.3v, surface mount 5.0x7.0mm, voltage controlled crystal oscillator (vcxo) with a lvcmos output and enable/ disable function. the v802 is designed for use with applications utilizing a pll system requiring low jitter and tight frequency stability. the surface mount package is designed for high-density mounting and is optimum for mass production. models: v802 65 to 130 mhz 3.3v operation absolute pull range (apr) temperature range: 0 to 70c lvcmos output low jitter 0.4ps rms typical enable / disable function: 5.0x7.0mm surface mount package tape and reel packaging rohs compliant / lead free : +/-50ppm 2111 comprehensive drive aurora, illinois 60505 phone: 630-851-4722 fax: 630-851-5040 www.conwin.com us headquarters 630-851-4722: european headquarters: +353-61-472221 description features specifications cw 07 v 48 802 125 mhz absolute maximum ratings table 1.0 parameter units minimum nominal maximum units note storage temperature -55 - 125 c supply voltage (vcc) -0.5 - 4.6 vdc control voltage (vc) -0.5 - vcc+0.5 vdc operating specifications table 2.0 parameter minimum nominal maximum units note center frequency (fo) 65 - 130 mhz operating temperature range 0 - 70 c supply voltage (vcc) 3.135 3.3 3.465 vdc supply current (icc) - - 40 ma period jitter - 3.0 5.0 ps rms integrated phase jitter (bw=12khz to 20mhz) - 0.5 1 ps rms typical phase noise fo = 74.25 mhz ssb phase noise at 10hz offset - -55 - dbc/hz ssb phase noise at 100hz offset - -85 - dbc/hz ssb phase noise at 1khz offset - -115 - dbc/hz ssb phase noise at 10khz offset - -135 - dbc/hz ssb phase noise at 100khz offset - -150 - dbc/hz input characteristics table 3.0 parameter minimum nominal maximum units note control voltage range (vc) 0.3 1.65 3.0 vdc absolute pull range (apr) 50 - - ppm 1 monotonic linearity -10 - 10 % dc input resistance - 60k - ohm 2 modulation bandwidth (3db) 10 - -khz enable input voltage (high) (vih) 2.4 - -vdc3 disable input voltage (low) (vil) - - 0.4 vdc 3 lvcmos output characteristics table 4.0 parameter minimum nominal maximum units note load - - 15 pf voltage (high) (voh) 2.4 - - vdc (low) (vol) - - 0.4 vdc duty cycle at 50% level 45 50 55 % rise / fall time 20% to 80% - - 2 ns package characteristics table 5.0 package hermetically sealed ceramic package with grounded metal cover process recommendations table 6.0 soldering process rohs compliant, lead free. see solder profile page 2.
2111 comprehensive drive aurora, illinois 60505 phone: 630-851-4722 fax: 630-851-5040 www.conwin.com specifications subject to change without notice. all dimensions in inches. ? copyright 2007 the connor-winfield corporation us headquarters: 630-851-4722 european headquarters: +353-61-472221 bulletin page revision date vx514 2of2 03 05 dec 2007 pad connections package layout test circuit tape and reel information 120c 150c 180c 260c 0 220c 360 sec. max. 120 s max. 10 s 60 s max. time temperature 260c solder profile ordering information output waveform suggested pad layout notes 0.200 (5.08mm) 0.100 (2.54mm) 0.079 (2.0mm) 0.165 (4.2mm) 0.070 (1.78mm) bypass capacitor 0.01uf ground to p view 4 5 6 3 2 1 enable / disable function to p view table 7.0 pin function 1 control voltage 2 enable / disable 3 ground (case) 4 output 5n/c 6vcc 1 sm-mech09 2 1 e/d n/c control voltage control voltage 6 5 4 3 table 8.0 enable / disable function (pad 2) output high or open enable low disable (high impedance) 1.0 absolute pull range (apr) is the minimum guaranteed pull range of the vcxo under all conditions over the lifetime operation. including calibration @ 25c, frequency vs. change in temperature, frequency vs. change in supply voltage, frequency vs. change in load, shock and vibration and aging for ten years. the apr is referenced to fo. positive transfer function. 2.0 measured from pin 1 to ground. 3.0 outputs are enabled with no connection on pad 2. 0.275 (7.00mm) 0.197 (5.00mm) 0.700 (1.80mm) 0.055 (1.40mm) 0.102 (2.6mm) dimensional tolerance +/-0.008 (+/-0.2mm) cw 0748 v802 125.0m v802 - 125.0m vcxo series center frequency
|
